Skip to content
In force2021 Revised Edition
Contents

Part · Inspections

19. Interpretation of this Part

(1)

A reference in this section and in section 20 to a compliance purpose is a reference to the purpose of -

(a)

determining whether the provisions of this Act have been or are being complied with;

Radiation Protection

CAP. 228 21

a

(b)

determining whether the conditions applicable to a licence have been or are being complied with by the licensee; or

(c)

ensuring the proper functioning at any premises of any device, apparatus or equipment installed.

(2)

A reference in sections 20 and 23 to an inspection power is a reference to a power to -

(a)

search or examine any premises;

(b)

inspect or examine any matter or thing (including examining and calibrating any controlled apparatus, instrument or measuring and control equipment);

(c)

take samples of any matter or thing for the purpose of examination or testing;

(d)

measure any quantity of radioactive material and nuclear material;

(e)

examine, take extracts from, or make copies of, any document

(including any record kept in accordance with the requirements of this

Act or the conditions of a licence);

(fl interview any person on the premises (including making recordings of such interviews);

(g)

operate any photographic or video-recording equipment anywhere in or around the premises;

(h)

operate any radiation detection or measurement device;

(i)

apply any surveillance or containment measures; or

0) do anything that is prescribed or that is necessary or expedient for the carrying out of any of the acts referred to in paragraphs (a)

to (i), including -

(i)

restricting or prohibiting the access of persons and vehicles to or from the premises; and

22

Radiation Protection

(ii)

applying labels. seals or other identifying and tamper-indicating devices.

(3)

A power referred to in subsection (2)(a), (b). (c), (d), (h), (i) or 0)

may only be exercised in a manner that the person authorised to exercise it believes, on reasonable grounds, to be in accordance with safety procedures applicable at the premises.

Report

Part

Enforcement

Part

General

Schedules